Sales, installation and renovation in Roosendaal and surrounding areas

Replacing window frames: how it works

When replacement makes sense, how the process runs from the first visit to the finishing, what happens on installation day and how permits work.

3 min read · I.J.M. Renovatiebedrijf

When does replacing your frames make sense?

Window frames last a long time, but not forever. Signs that replacing is wiser than repairing again:

  • Wood rot that keeps coming back, especially at the bottom of the frame and the sill.
  • Draughts that remain even after new weatherstrips.
  • Condensation between the panes: the glass seal has failed and most of the insulation is gone.
  • Windows and doors that stick, no longer close properly or have outdated locks.
  • Single glazing or old double glazing, and heating bills you find too high.

If only the glass is poor and the frame is sound, new glass in the existing frame can sometimes be enough, provided the rebate is deep enough for the new glass unit. If the frames themselves are worn out, full replacement pays off in the long run: better insulation, less maintenance and modern hardware.

Replacing wooden frames: wood again or something else?

When replacing wooden frames, you do not have to choose wood again. PVC with a wood-grain foil looks much like painted timber from a distance and needs hardly any maintenance. Wood remains the logical choice for characterful homes and often for listed buildings, where the original look must be kept. Wood-aluminium combines warm wood inside with low-maintenance aluminium cladding outside.

Changing the material or profile shape changes how the facade looks, which can affect the permit question; see below.

Step by step: from first visit to finishing

  1. First contact. You tell us what you want to replace; photos inside and out help.
  2. Visit and measuring. We measure each opening exactly and check the brickwork, lintels, sills, interior finish and ventilation.
  3. Quote. For each frame you see the material, glass, opening direction, colour, hardware and finishing.
  4. Permit check. If the front changes or your home is listed, settle the permit question first.
  5. Made to measure. Each frame is made for your opening.
  6. Installation. Old out, new in, levelled, anchored, insulated and sealed watertight.
  7. Finishing. We finish the reveals inside; because we also plaster and paint, you need no separate tradesperson.

What happens on installation day?

We start by covering floors and protecting the work area. Then we work opening by opening: the old frame is cut loose and removed, the opening is cleaned, and the new frame is placed, levelled and anchored. The joint between frame and wall is insulated, sealed watertight outside and airtight inside. Then the glass goes in and the sashes and doors are adjusted.

Because we work one opening at a time, your home is never open for long. You can help by clearing windowsills, taking down curtains and rails, and moving furniture well away from the windows. Some dust is unavoidable; we clean up and take the old material away.

Permits and listed buildings

Whether you need a permit to replace window frames depends on what changes and where. Broadly:

  • Replacing with a frame of the same shape, profile, colour and material counts as ordinary maintenance and needs no permit.
  • In the rear facade, and in a side facade not facing public space, replacement is usually permit-free.
  • On the front facade and a side facade facing the street, your municipality’s local plan (omgevingsplan) applies, and a permit may be needed.
  • For a listed building or in a nationally protected townscape, a permit is needed unless the colour and type of material stay the same.

In an apartment, also ask your owners’ association (VvE). If in doubt, use the permit check in the Omgevingsloket or call your municipality. Background is explained by the government information point IPLO (in Dutch).

What determines the cost?

Costs vary too much from house to house to give a fair figure here. The main factors are the number, sizes and material of the frames; the glass (HR++, triple, laminated or acoustic); fixed or opening sections; colour, hardware and vents; access, such as scaffolding upstairs; and extra work on lintels, sills and finishing. An ISDE subsidy via RVO exists for insulating glass under conditions.

Want to know the cost for your home? Call 06 21 91 31 83. We visit homes in Roosendaal and surrounding areas, and send a no-obligation quote after measuring.

Frequently asked questions

Should I replace only the glass or the whole frame?

If the frame is sound and the rebate deep enough, new glass may be enough. With rot, draughts or sticking windows, replacing the whole frame is usually better. We assess this when measuring.

Can I stay at home during installation?

Yes. We work one opening at a time, so your home is never open for long. Clear windowsills and move furniture aside beforehand.

Do I need a permit to replace window frames?

Usually not for like-for-like replacement or in the rear facade. On the front facade, for a listed building or in a protected townscape you may. Check the Omgevingsloket or ask your municipality.

Can I replace wooden frames with PVC?

Often yes, but it changes the look, so a permit may be needed on the front facade or for listed buildings. Check before ordering.

Is there a subsidy for new frames?

There is an ISDE subsidy for insulating glass under conditions, with a higher amount for triple glazing in new frames. See rvo.nl for the current rules.

Question not listed? Ask your question

Curious what is possible in your home?

Tell us about your plans and receive a proposal with no obligation.

Prefer direct contact? 06 21 91 31 83 · WhatsApp

Request your quote

How can we help?

No obligation. We only use your details to respond to your request. By sending you agree to our privacy statement.