Is there a subsidy for PVC window frames?
Not for the frame itself. The national scheme for homeowners is the ISDE (Investment subsidy for sustainable energy and energy saving), run by RVO. It covers insulating glass and, under conditions, insulating doors and panels. New frames do matter: triple or vacuum glass in new frames earns a higher amount per m² than glass alone.
Everything below is based on RVO’s pages as we checked them in November 2026. The rules change regularly, so always check the RVO page on insulation measures (in Dutch) before you place an order.
Who can apply?
According to RVO (November 2026), the conditions include:
- You own and live in the home. Rented homes fall under other schemes.
- The home was built before 1 January 2019, or you show that its building permit was applied for before 1 July 2018.
- You have the work done first and apply afterwards, within 24 months of installation.
- The work is carried out by a building or installation company; DIY work does not count.
Listed buildings have separate conditions.
Which glass qualifies?
RVO sets limits on the glass’s insulation value (the Ug value, in W/m²K; lower is better):
- HR++ glass: Ug at most 1.2.
- Triple glazing: Ug at most 0.7.
- Vacuum glass: Ug at most 0.7.
For the higher amount, triple glazing must go into new frames. Since 2026 those frames no longer need to meet a separate insulation requirement. Triple glazing without new frames earns the lower HR++ amount. Insulating panels and doors only count if you also have HR++, triple or vacuum glass installed. The glass must be on RVO’s product code list (meldcodelijst); check this before buying.
Minimum and maximum area
- For glass installed after 1 January 2025, the minimum insulated area is 3 m², and all types of glass insulation may be added together.
- The maximum is 45 m².
- Measure the total glass area from the inside, including the frame.
- Only m² that replace old windows, panels or doors count; glass in a new opening in a former wall does not.
One measure or two?
One measure is enough to qualify. If you carry out more than one insulation measure, or combine insulation with a heat pump, solar water heater or heat network connection, the insulation amount doubles. The next measure must follow within 24 months of the previous one; ventilation alone does not count. For glass insulation you may apply twice, within 24 months of the first glass measure. Amounts per m² are in RVO’s ISDE calculator; we leave them out because they can change each year.
Common mistakes that cost subsidy
- The glass is not on the product code list, or the Ug value cannot be found on the invoice or glass schedule.
- No photo was taken during the work showing your address.
- The 24-month deadline after installation has passed.
- The m² of a new opening, such as a new glazed wall in a solid wall, were included.
- Triple glazing went into old frames while the higher new-frame amount was expected.
- Less than 3 m² was insulated.
Planning more improvements, such as roof or floor insulation? Keep them close enough together to stay within the 24 months for the doubling.
How to apply
- Choose glass on the product code list that meets the Ug limit.
- Have the work done and take a photo during the work that clearly shows your address.
- Keep the invoice and proof of payment, showing the installation date, amount and payment date.
- Ask the installer for a frame or glass schedule with the m², glass type and insulation value.
- Apply within 24 months via the ISDE page for homeowners.
You apply yourself; we make sure you know which glass was fitted and how many m² it covers. To spread the cost, the Warmtefonds lists high-efficiency glass and insulating frames among the measures for its energy-saving loan. Planning new frames in or around Roosendaal? Call 06 21 91 31 83 to arrange measuring.